The Advance® 3000 was designed to meet the demand of low flow, high-pressure applications, while utilizing the compatibility of Noryl® wetted parts. The enclosed impeller design ensures long life and durability. When used with the patented Impenatra® Seal, the fluid does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys. The Advance® 3000 has multiple drain locations, allowing for several discharge orientations.
The Advance® 3000 is a close coupled, unit end suction centrifugal pump line which is molded in Noryl®. It's high efficiency design makes it suitable for medium flows (to-60 GPM) and higher heads (up to 160' TDH). When fitted with the patented Impenetra® Seal, the Advance® 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit.
The pump can be close coupled to a 56J motor or mounted to a pedestal. We stock single and three phase motors in both ODP and TEFC enclosures. An adapter kit is available to convert to a 56C flange. A variety of elastomers, seal, impellers, and motors, can be combined to meet your exact requirements. All units are bench tested prior to shipping.
Typical applications serviced by the Advance® 3000 include laser coolers, filtration systems, deionized water transfer, waste water reclamation, pressure spray systems, fountains, plating chemical transfer and re-circulation, fume scrubbers, pollution control equipment, and transfer of chemical process fluids.
Due to its excellent corrosion resistance, the pump can handle most acid, base, and inorganic compounds, including Ammonium Hydroxide, D.I. Water, Ethylene Glycol, Ferric Chloride, Hydrochloric Acid (10%,37%), Salt Water, Sodium Bicarbonate (SAT), Sodium Hydroxide, Sodium Hypochlorite, and Sulfuric Acid (10%,60%).